Blanking Cap | BFM® Fitting
Superior to traditional hose clamped blanking caps
The BFM® Blanking Caps are made from our strong Seeflex 040E material.
Use the blanking caps to prevent contamination during clean down or change-over. They protect products and prevent dust emission into the factory.
They are ideal for use as sight-glasses/inspection ports or for use as sifter oversize collection containers. Transparent for monitoring fill level and reject consistency, socks can be lined with plastic bags for a fast, hygienic solution to disposing of sifter waste.
Physical Properties
Surface Finish: Gloss/Gloss
Hardness (Shore A): 90
Wall Thickness: 0.9 mm / 1/32 inch
Operating Temp Range: -25 to 110˚C, -13 to 230˚F
Max. Surge Temp: 120˚C / 248˚F
Air Permeability: 0
Available Sizes
Diameters: Ø100mm (4"), Ø125mm (5"), Ø150mm (6") through to Ø1,650mm (65") in 50mm (2") increments
Lengths: All blanking caps are 30mm (1 3/16") in length.
Complies With
FFDA 21 CFR177.1680 and 177.2600, USDA and 3A (20-), (EC) 1935/2004, 2023–2006 & 10/2011.