Flexi-Earthed | BFM® Fitting
Superior to traditional hose clamped canvas/cloth/rubber connectors
The Flexi-Earthed connector is made from an ether-based polyurethane with a 316 stainless steel wire coil and terminal lugs at each end.
Use Flexi-Earthed fittings for bag feeders, filling heads, or bulk bag fillers where electrical grounding is required. Terminal lugs are designed to be attached to grounding cables at each end to provide maximum safety. CIP safe, excellent microbial resistance. Very flexible & lightweight, tight bend radius. High mechanical strength & good hydrolytic stability.
Physical Properties
Surface Finish: Gloss/Gloss
Wall Thickness: (Ø100 – 200mm) 0.60mm (Ø6 - 8”) 1/32 “ (Ø250 – 300mm Dia) 0.70mm (Ø10 - 12“) 1/32“
Tensile Strength (MPa): 34
Temp Range: -20 to 85˚C, -4 to 185˚F
Tear Strength (N/mm): 96
Wire Coil Diameter: 2.6mm / 7/64“
Wire Coil Position: 50mm / 2“ from cuff
Compression Ratio of Coil Section (Approx.): 3:1
Permeability: 0
Key Features/Uses
- Terminal lugs are designed to be attached to earthing cables at each end to provide maximum safety
- Ideal for bag feeders, filling heads or bulk bag fillers
- CIP safe, excellent microbial resistance
- Very flexible & lightweight, tight bend radius
- High mechanical strength & good hydrolytic stability
Available Sizes
Diameters: Ø100mm (4") to Ø300mm (12") in 50mm (2") increments
Lengths: 250mm (10") up to 4,000mm (13ft 1½") in 50mm (2") increments
Complies With
FDA 21 CFR 177.1680, 175.105 (adhesives) and 177.2600, USDA & 3A (20–), (EC) 1935/2004, 2023–2006 & 10/2011