Seeflex 020E | BFM® Fitting
Superior to traditional hose clamped canvas/cloth/rubber connectors
Seeflex 020E is a clear, lightweight ether-based thermoplastic polyurethane alloy connector.
Use Seeflex 020E for weigh-scale type applications. It is Atex Compliant: IBExU tested and can be used in all dust explosion hazardous areas. (A copy of the certification is available on request from BFM® Fitting).
Physical Properties
Surface Finish: Gloss/Gloss
Hardness (Shore A): 90
Wall Thickness (+/- 10%): 0.35 mm / 1/64 inch
Tensile Strength (MPa): 78
Operating Temp Range: -25 to 80˚C, -13 to 176˚F
Max. Surge Temp (˚C): 100˚C / 212˚F
Max. Operating Pressure (for temp. to 90˚C / 195˚F)*: 0.10 bar / 1.5 PSI
Low Temp Flexibility: Good
Ultimate Elongation (%): 644
Tear Strength – Die C (N): 17
Surface Resistivity (Ohms) (Tested to ASTM D-257): 1010
100% Modulus (MPa): 8.3
300% Modulus (MPa): 18.4
Air Permeability: 0
Key Features/Uses
- Lightweight, transparent Seeflex media, specifically designed for load and weight scale type equipment
- Also excellent for applications with vertical movement as it is particularly flexible
- Seeflex 020E will not fracture as a result of constant flexing
Available Sizes
Diameters: Ø100mm (4"), Ø125mm (5"), Ø150mm (6") through to Ø1,650mm (65") in 50mm (2") increments
Lengths: 80mm (3"), 100mm (4") then in 50mm (2") increments up to 6,000mm (19ft 8")
Complies With
FDA 21 CFR 177.1680 & 177.2600, USDA & 3A (20-), (EC) 1935/2004, 2023–2006 & 10/2011