410 | LORD Acrylic Adhesive
LORD® 410 acrylic adhesive in combination with LORD Accelerator 17, 19 or 19GB can be used to replace welding, brazing, riveting and other mechanical fastening methods. This adhesive system performs particularly well in low-temperature environments and applications that are subject to high impact or high peel loads.
LORD 410 acrylic adhesive, when mixed with LORD Accelerator 17, 19 or 19GB, creates an adhesive system that bonds a wide variety of prepared or unprepared metals and engineered plastics. The adhesive system is specifically formulated to provide the highest impact and peel strengths available in a room temperature curing adhesive.
LORD 410 acrylic adhesive can be mixed with either LORD Accelerator 17, LORD Accelerator 19 or LORD Accelerator 19GB. LORD Accelerator 19 improves the high temperature resistance of LORD 410 acrylic adhesive, and is available in off-white or black. LORD Accelerator 19GB allows precise control of the adhesive bondline thickness due to its content of glass beads. LORD Accelerator 19GB is available in off-white, red or grey.
Typical shelf life is nine months when stored below 80°F (27°C) in original, unopened container. Storage temperatures of 40-50°F (4-10°C) are recommended. If stored cold, allow product to return to room temperature before using. Protect from exposure to direct sunlight.
LORD 410 acrylic adhesive is flammable. Do not store or use near heat, sparks or open flame.
Adhesive Properties
Data is typical and not to be used for specification purposes
Appearance: Off-white to Tan Paste
Viscosity, cP, @ 77°F (25°C) Brookfield: 100,000 - 300,00
Density, lb/gal (kg/m3): 9.15 - 9.65 (1096 - 1156)
Flash Point, °F (°C): 59 (15)
Working Time, min @ 75°F (24°C): 20 - 30
Time to Handling Strength, min @ 75°F (24°C) 50 psi Shear: 60 - 120
Full Cure Time hr: 24
Mixed Appearance: Color dependent on accelerator used
Mixed Solids Content by Weight, %: 100
Features & Benefits
- Versatile – bonds a wide range of unprepared metals with minimal substrate preparation, as well as engineered thermoplastics including XENOY®, polycarbonate, ABS and acrylics.
- Temperature Resistant – performs at temperatures from -40°F to +300°F (-40°C to +149°C).
- Environmentally Resistant – resists dilute acids, alkalis, solvents, greases, oils and moisture; provides excellent resistance to indirect UV exposure and weathering.
- Non-Sag – remains in position when applied on vertical or overhead surfaces, allowing for greater process flexibility.
-
UL Approved Adhesive – when mixed with LORD Accelerator 19, adhesive system is UL 746C certified.