Maxlok T3 | LORD Acrylic Adhesive
LORD Maxlok™ MX/T3 acrylic adhesive replaces welding, brazing, riveting, and other mechanical fastening methods especially over a wide range of temperature environments subject to high impact or high peel loads.
The shelf life of each component is nine months when stored at temperatures under 80°F (27°C) in an original, unopened container. For maximum shelf life, storage temperatures of 40-50°F (4-10°C) are recommended. If stored at these cooler temperatures, allow the product to return to room temperature before using. Protect from exposure to direct sunlight.
LORD Maxlok MX/T3 acrylic adhesive is flammable. Do not store or use near heat, sparks or open flame.
Adhesive Properties
Data is typical and not to be used for specification purposes
Mixed Appearance: Grey Paste
Mixed Solids Content %: 100
Working Time, min @ 77°F (25°C): 3 - 5
Time to Handling Strength, min @ 77°F (25°C) 50 psi Shear: 6 - 8
Cure Time hr: 24
Appearance: Off-white to Tan Paste
Viscosity, cP, @ 77°F (25°C) Brookfield: 70,000 - 200,000|
Density, lb/gal (kg/m3): 8.25 - 8.75 (989 - 1048)
Flash Point, °F (°C): 59 (15)
Maxlok MX Accelerator Properties
Appearance: Grey Paste
Viscosity, cP, @ 77°F (25°C) Brookfield: 100,000 - 500,000
Density, lb/gal (kg/m3): 8.25 - 8.75 (989 - 1048)
Features & Benefits
- Versatile– bonds a wide range of unprepared metals with minimal substrate preparation.
- Temperature Resistant– performs at temperatures from -40°Fto +300°F (-40°Cto +149°C).
- Environmentally Resistant– resists dilute acids, alkalis, solvents, greases, oils, moisture, salt spray and weathering; provides excellent resistance to indirect UV exposure.
- Precise Bondline– allows precise control of adhesive bondline thickness due to its content of glass beads, 0.01" (0.025 cm) diameter.
- Non-Sag– remains in position when applied on vertical or overhead surfaces, allowing for greater process flexibility.