309-1D GB / 309-2D | LORD Epoxy Adhesive
LORD® 309-1D GB/309-2D adhesive is a high performance, thixotropic, two-component epoxy adhesive system used for applications that require gap filling or non-sag characteristics on a vertical surface. This adhesive system provides excellent adhesion to prepared metals, fiberglass reinforced plastics (FRP), wood, prepared rubber, and other materials.
LORD 309-1D GB/309-2D adhesive can be either room temperature cured or heat cured for faster processing. LORD 309-1D GB/309-2D adhesive allows precise control of the adhesive bondline thickness due to its content of glass beads.
Shelf life is two years from date of manufacture when stored at 60-80°F (16-27°C) in original, unopened container.
Adhesive Properties
Data is typical and not to be used for specification purposes
Work Time, min @ 75°F (24°C) 54 g mass: 1.5 - 2
Time to Handling Strength, min: 8 - 16
Cure Time hr: 24
Mixed Appearance: Blue-Green Paste
Mixed Solids Content by Weight, %:100
LORD 309-1D GB Resin - Adhesive Properties
Data is typical and not to be used for specification purposes
Appearance: Blue Paste
Viscosity, cP @ 77°F (25°C): 300,000 - 1,100,000
Density lb/gal (kg/m3): 10.5 -10.9 (1258-1306)
Flash Point, °F (°C) Closed Cup: >200 (>93)
LORD 309-2D Hardener - Adhesive Properties
Data is typical and not to be used for specification purposes
Appearance: Amber Paste
Viscosity, cP @ 77°F (25°C): 300,000 - 1,000,000
Density lb/gal (kg/m3): 8.25 - 8.65 (989-1036)
Flash Point, °F (°C) Closed Cup: >200 (>93)
Features & Benefits
- Durable – provides load bearing properties equal to or greater than the materials being bonded. LORD 309-1D GB/309-2D adhesive provides excellent peel strength.
- Environmentally Recommended – contains no solvent, nonflammable and virtually odorless.
- Environmentally Resistant – resists moisture, sunlight and weathering.
- Temperature Resistant – performs at temperatures from -30°F to +250°F (-34°C to +121°C).
- Chemically Resistant – resists dilute acids, alkalis, solvents, greases and oils.
- Excellent Engineering Properties – provides low shrinkage, good creep properties and low water absorption.