Transair Piping System Tools | Parker Transair

Tools in this section are specialty tools for assembly of Transair piping systems. They are used for both air and industrial water distribution piping, except where noted.

Please consult the Parker Transair Installation Guide for complete instructions on piping installation and use of the specialty tools.

Tool Case Ø 16.5 to 63

Transair	H	L	I
6698 00 03	315	290	105

This tool case simplifies the use and transportation of tools. It contains all the tools necessary for completing an installation:

Drilling jigs 6698 01 01 anbd 6698 01 02
Drilling tools 6698 02 01 and 6698 02 02
Cutter for rigid pipe 6698 03 01
Chamfer tool 6698 04 01
Deburring tool 6698 04 02
Set of tightening spanners 6698 05 03
Marking tool 6698 04 03

Pipe Cutter - Ø 16.5 to 63

Transair	L	H	Used for Transair Pipe
6698 03 01	230	98	Ø16.5 - 25 - 40 - 63
EW08 00 01	360	155	Ø63 - 76 - 100
EW08 00 03	600	300	Ø100 - 168

Spare rotary cutter blade for Transair cutter 6698 03 01: EW08 00 99.
Spare rotary cutter blade for Transair cutter EW08 00 01: EW08 00 02.

Drilling Jig for Rigid Aluminum Pipe - Ø 25 to 40

Transair	H	L
6698 01 01	120	80

After drilling, deburr and clean the pipe.

Drilling Jig for Rigid Aluminum Pipe - Ø 63

Transair	H	L
6698 01 02	134	155

After drilling, deburr and clean the pipe.

Drilling Tool for Aluminum Pipe - Ø 63

Transair	ØD1	ØD2	H	For Transair Pipe
6698 02 02	16	12	71	Ø 25mm

Drilling tool 6698 02 02 is required to install Ø 25 Transair brackers.
Can be used with all types of drills

Drilling Tool for Aluminum Pipe - Ø 40, 63

Transair	ØD1	ØD2	H	For Transair Pipe
6698 02 01	22	12	71	Ø 40 - 63mm

Drilling tool 6698 02 01 is required to install Ø 40 and Ø 63 Transair brackets. It is also used to creat the two holes needed for double-clamp ring connectors when cutting to length Ø 63 Transair pipe.

Drilling Tool for Aluminum Pipe - Ø 40 - 168

Transair	ØD1	ØD2	H	For Transair Pipe
EW09 00 22	22	12	71	Ø 40 - 63mm
EW09 00 30	30	12	71	Ø 76 - 100mm
EW09 00 51	51	12	110	Ø 168mm
EW09 00 64	64	12	71	Ø 40 - 63mm

Drilling tool EW09 is required to install Transair simple reducing brackets.
After drilling, it is important to deburr and clean the pipe.

Deburring Tool for Aluminum Pipe - Ø 16.5 - 168mm

Transair	L
6698 04 02	140

Chamfer Tool for Aluminum Pipe - Ø 16.5, 25, 40

Transair	H
6698 04 01	64

For 16.5, 25, and 40mm.

Marking Tool for Aluminum Pipe - Ø 16.5, 25, 40

Transair	H	L1	L2
6698 04 03	88	73	33

The marking tool is used as a guide for marking cut lengths on Transair pipe. These marks indicate the insertion limits of the pipe into each fitting in order to ensure a good airtight connection and secure grip.

Spanner Wrenches for Ø 63mm Fittings

Transair

6698 05 03

Includes two tightening spanners.

Pressurized System Drilling Tool

Transair	C	ØD	L	E	N
EA98 06 00	1/2"	13	330.0	154.0	30.5

Portable Tool Kit

Transair	V
EW01 00 02	14

This case contains: one portable tool, one 14V battery and battery charger.

Jaws for Portable Tool - Ø 76, 100, 168

Transair	ØD	E1	E2	L1	L2
EW02 L1 00	76	103	52	154	46
EW02 L3 00	100	103	71	154	46
EW02 L8 00	168	103	52	154	46
EW02 M4 00	38	103	28	154	46
EW02 M6 00	51	103	42	154	46

14V Battery for Portable Tool

Transair	V
EW03 00 01	14

Dismounting Tool - Ø 1/2" and 3/4"