Air Saver | Parker ASV200

 Parker ASV200 Air Saver

 

For help with using Air Savers
in your specific application,
contact our engineers:

 

What is an Air Saver?

An air valve that converts constant flow of air to pulsating air (Pulsing Air Valve)

In open-ended pneumatic applications, compressed air consumption can be reduced by up to 50%, while performing the same amount of work.

 

Air Savers FAQ

Air Saver Savings Chart

 

ASV 200 Ordering Information


FLOW
CFM
@ 72.5 PSI		 PORT OPERATING
TEMP °F
(A)		 PRESSURE
PSI		 PILOT PRESSURE
PSI		 GREASE PART NUMBER
5.3 M5 23-122 43.5-116 Internal Pilot Food Grade ASV200-AA-M5
5.3 M5 23-122 43.5-116 Internal Pilot Petrolatum
(B), (C), (D)		 WPASV200-AA-M5

 

ASV200-AA-M5 Dimensions

ASV200 Air Saver Dimensions 

Ports:

  • Port 1: Supply port (Compressor side)
  • Port 2: Output port (Blow nozzle side)
  • Port 3: Exhaust port (Air muffler recommended to keep the dust out)

Notes:

  • (A) Use with dry air only. When temperature of the valve is below 41°F (5°C), completely dry air must be supplied to prevent freezing.
  • (B) Air Saver units with "WP" prefix are suitable for most painting applications. Test before using if in direct contact with painted surface. 
  • (C) If test in painting application fails, try cycling Air Saver unit for 48 hours and repeat test.
  • (D) Do not use with clear coat applications.
  • (E) Adjustable to maximum frequency of 5Hz

 


Warning Triangle WARNING: These products can expose you to chemicals including lead and/or DEHP and/or carbon black, which are known to the State of California to cause cancer or birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov