JIC Nuts, Sleeves & Locknuts | Parker Triple-Lok
Parker Triple-Lok JIC tube fitting design is simple. The tube fitting consists of three pieces: the body, the nut and the sleeve. The tube end is flared at a mating 37 degree angle and sandwiched between the fitting nose (seat) and the sleeve. This creates a very effective seal between the fitting nose and tube flare, or hose. Read more about how JIC fittings work.Although most JIC fittings are commonly viewed as 3,000 PSI connectors, Parker Triple-Lok JIC flared fittings are rated at 9,000 PSI for 1/4" size to 2000 PSI for 2” size. Parker JIC 37 degree flare fittings are manufactured in steel, 316 stainless steel or brass, and are available from Hose & Fittings, Etc.
Nuts, Sleeves & Locknuts for 37° Flare JIC Fittings
JIC Nut |
JIC Sleeve |
JIC Sleeve |
JIC Bulkhead Locknut |
JIC Braze Rings
|
Related Information
Hose fittings - Go to hose fittings page Tube fittings - Go to tube fittings page How JIC (Triple-Lok) Fittings Work - Learn how Parker's JIC fittings function. JIC Assembly instructions - Proper 37° connection assembly is a key to leak-free connection Troubleshooting JIC connections - Got a leak in your JIC connection? Learn how to figure it out! |
Related Information
- Thread Guide - Inch Thread
- Thread Guide - Metric, JIS, BSPP
- TS1000 Plating
- Tube End Specs
- Port End Specs
Related Information
- Thread Guide - Inch Thread
- Thread Guide - Metric, JIS, BSPP
- TS1000 Plating
- Tube End Specs
- Port End Specs