VEU - Polypropylene Ball Valves - Metric Elbow Union | LIQUIfit™
LIQUIfit’s corrosion-resistant, all plastic design makes these Parker ball valves ideal for water filtration units, coffee and beverage machines, plus a wide variety of other fluid applications.
The polypropylene material meets all FDA and NSF-51 requirements for food contact.
|
Return to Thermoplastic Ball Valves Product Selection Page
Part No. |
1 Tube Size |
2 Tube Size |
A |
B |
C |
D |
ØE Thru Hole Min. |
LFPP6MVEU6M | 6MM | 6MM | 1.61 | 1.08 | 2.15 | 1.24 | .19 |
LFPP8MVEU8M | 8MM | 8MM | 1.62 | 1.09 | 2.3321 | 1.30 | .25 |
LFPP10MVEU10M | 10MM | 10MM | 1.84 | 1.30 | 2.42 | 1.51 | .33 |
LFPP12MVEU12M | 12MM | 12MM | 2.25 | 1.72 | 2.48 | 1.56 | .37 |
Assembly Instructions:
- Inspect the mating threads for debris or damage. Remove any old fluoropolymer tape or sealant on previously used threads.
If threads are damaged, use a new adapter before proceeding. - Apply 2 to 3 wraps of fluoropolymer tape or an NSF/FDA approved silicone sealant.
Do not use Plumbers Putty or Pipe Dope. These chemically react with plastic materials and could cause a failure. - Align ball valve onto mating thread to ensure cross threading does not occur.
- Screw ball valve onto mating thread 3 to 5 turns. Do not over-tighten
- Pressurize the system and check for leaks.