VFC - Polypropylene Ball Valves - Female Connector | LIQUIfit™
LIQUIfit’s corrosion-resistant, all plastic design makes these Parker ball valves ideal for water filtration units, coffee and beverage machines, plus a wide variety of other fluid applications.
The polypropylene material meets all FDA and NSF-51 requirements for food contact.
 |
 |
|
Return to Thermoplastic Ball Valves Product Selection Page
| Part No. |
Nom. Tube O.D. |
NPTF Thread Size |
A |
B |
C |
D |
ØE Thru Hole Min. |
| LFPP4VFC2 | 1/4 | 1/8 | 2.04 | 1.21 | 1.4 | .5 | .19 |
| LFPP4VFC4 | 1/4 | 1/4 | 2.27 | 1.21 | 1.4 | .5 | .19 |
| LFPP4VFC6 | 1/4 | 3/8 | 2.40 | 1.21 | 1.4 | .5/td> | .19 |
| LFPP6VFC2 | 3/8 | 1/8 | 2.15 | 1.32 | 1.4 | .5 | .25 |
| LFPP6VFC4 | 3/8 | 1/4 | 2.38 | 1.32 | 1.4 | .5 | .25 |
| LFPP6VFC6 | 3/8 | 3/8 | 2.51 | 1.32 | 1.4 | .5 | .25 |
Assembly Instructions:
- Inspect the mating threads for debris or damage. Remove any old fluoropolymer tape or sealant on previously used threads.
If threads are damaged, use a new adapter before proceeding. - Apply 2 to 3 wraps of fluoropolymer tape or an NSF/FDA approved silicone sealant.
Do not use Plumbers Putty or Pipe Dope. These chemically react with plastic materials and could cause a failure. - Align ball valve onto mating thread to ensure cross threading does not occur.
- Screw ball valve onto mating thread 3 to 5 turns. Do not over-tighten
- Pressurize the system and check for leaks.
