VFC - Polypropylene Ball Valves - Female Connector | TrueSeal™

TrueSeal™ Parker Valves feature all plastic design, which makes them ideal ball valve choice for water filtration units, coffee and beverage machines, plus a wide variety of other fluid applications.
The polypropylene material meets all FDA and NSF-51 requirements for food contact.

VFC TrueSeal Valve Female Connector
 		 vfc-trueseal-specs.jpg
  • Working Pressure: 150 PSI
    Pressure rating reduced at elevated temperatures.
  • Temperature Range: 0°F to +225°F
  • O-Ring Seal Material: EPDM
  • Bi-Directional Flow
  • Full Flow Design
  • NSF-51 Listed, FDA Approved

Return to Thermoplastic Ball Valves Product Selection Page

Part No.

Nom. Tube O.D.

 NPTF Thread Size

A

B

C

D

ØE Thru Hole Min.
PP4VFC2-MG 1/4 1/8 2.04 1.21 1.4 .5 .19
PP4VFC4-MG 1/4 1/4 2.27 1.21 1.4 .5 .19
PP4VFC6-MG 1/4 3/8 2.40 1.21 1.4 .5 .19
PP6VFC2-MG 3/8 1/8 2.15 1.32 1.4 .5 .25
PP6VFC4-MG 3/8 1/4 2.38 1.32 1.4 .5 .25
PP6VFC6-MG 3/8 3/8 2.51 1.32 1.4 .5 .25

Assembly Instructions:

  1. Inspect the mating threads for debris or damage. Remove any old fluoropolymer tape or sealant on previously used threads. br> If threads are damaged, use a new parker valve before proceeding.
  2. Apply 2 to 3 wraps of fluoropolymer tape or an NSF/FDA approved silicone sealant.
    Do not use Plumbers Putty or Pipe Dope. These chemically react with plastic materials and could cause a failure.
  3. Align ball valve onto mating thread to ensure cross threading does not occur.
  4. Screw ball valve onto mating thread 3 to 5 turns. Do not over-tighten
  5. Pressurize the system and check for leaks.