VUCPB - Polypropylene Ball Valves - Union Connector | LIQUIfit™

LIQUIfit’s corrosion-resistant, all plastic design makes these Parker ball valves ideal for water filtration units, coffee and beverage machines, plus a wide variety of other fluid applications.
The polypropylene material meets all FDA and NSF-51 requirements for food contact.

VUCPB Barbed Valve Union Connector Barbed x Tube
 		 VUCPB Liquifit Dimensions
  • Working Pressure: 150 PSI
  • Temperature Range: +35°F to +200°F
  • O-Ring Seal Material: EPDM
  • NSF-51 Listed, FDA Approved

Return to Thermoplastic Ball Valves Product Selection Page

Part No.

Hose ID

 Tube OD

OD

A

B

C

D

ØE Thru Hole Min.
LFPP4VUCPB4 1/4 1/4 .31 2.40 1.08 1.42 .50 .15
LFPP6VUC6 3/8 3/8 .43 2.63 1.32 1.42 .50 .19

Assembly Instructions:

  1. Inspect the mating threads for debris or damage. Remove any old fluoropolymer tape or sealant on previously used threads.
    If threads are damaged, use a new adapter before proceeding.
  2. Apply 2 to 3 wraps of fluoropolymer tape or an NSF/FDA approved silicone sealant.
    Do not use Plumbers Putty or Pipe Dope. These chemically react with plastic materials and could cause a failure.
  3. Align ball valve onto mating thread to ensure cross threading does not occur.
  4. Screw ball valve onto mating thread 3 to 5 turns. Do not over-tighten
  5. Pressurize the system and check for leaks.