Industry News & Information Blog by Motion & Flow Control Products

P1Q Compact Air Cylinder Extrusion Change

Written by Marek Bobik | Mon, Dec 17, 2012 @ 09:46 PM
Effective immediately, the P1Q compact air cylinder series will be produced using a new extrusion design.
The new P1Q design incorporates flush mount sensor grooves on multiple sides of the cylinder body. The new flush mount design will maximize sensor protection, while allowing access to multiple sides of the cylinder. In addition, a few dimensional changes have been incorporated on bore sizes 12 mm through 20 mm. Please download the updated Parker Catalog 0960-E for more information.

 

Old Profile

Updated Profile

 

Electronic Sensor Part numbers have also changed – please see the cross reference table below:

Sensors Cross-Reference to Replacement Part Numbers

Obsolete Part Number

Replacement Part Number

P8S-CPSHS

P8S-EPSUS

P8S-CPMHS

N/A - M12 no longer available due to low demand

P8S-CPFLS

P8S-EPFXS

P8S-CNSHS

P8S-ENSUS

P8S-CNMHS

N/A - M12 no longer available due to low demand

P8S-CNFLS

P8S-ENFXS

P8S-CRSHS

P8S-ERSUSP8S-ERSUS

P8S-CRMHS

N/A - M12 no longer available due to low demand

P8S-CRFLS

P8S-ERFXS

P8S-CPSHR

P8S-EPSUS

P8S-CPMHR

N/A - M12 no longer available due to low demand

P8S-CPFLR

P8S-EPFXS

P8S-CNSHR

P8S-ENSUS

P8S-CNMHR

N/A - M12 no longer available due to low demand

P8S-CNFLR

P8S-ENFXS

P8S-CRSHR

P8S-ERSUS

P8S-CRMHR

N/A - M12 no longer available due to low demand

P8S-CRFLR

P8S-ERFXS

P1Q: Great Cylinder For Small Spaces

  • Built-in bumpers result in quieter operation.
  • Standard stroke ranges of 5 mm to 100 mm (0.2” to 4”).
  • 10 standard bore sizes range from 12 mm to 100 mm (0.5” to 4”).
  • Working pressure up to 145 psi.
  • Piston wear bands increase service life (available for bore sizes 40 mm to 100 mm).
  • Rod end thread options may be either female or male.
  • Rod ends may be either magnetic or non-magnetic.
  • Teflon piston wear ring (available with magnetic option, 32 – 100 mm bores) provides increased service life.

Parker Pneumatic Division also released a new Cross Reference Tool for the P1D Series ISO Cylinders. Easily convert competitive part numbers to a Parker ISO Cylinder equivalent with just a few clicks.

 

Posted by Roger Winchell
View full post