VMC - Polypropylene Ball Valves - Male Connector | TrueSeal™

TrueSeal™ Parker Valves feature all plastic design, which makes them ideal ball valve choice for water filtration units, coffee and beverage machines, plus a wide variety of other fluid applications.
The polypropylene material meets all FDA and NSF-51 requirements for food contact.

VMC TrueSeal Valve Male Connector  VMC TrueSeal Dimensions
  • Working Pressure: 150 PSI
    Pressure rating reduced at elevated temperatures.
  • Temperature Range: 0°F to +225°F
  • O-Ring Seal Material: EPDM
  • Bi-Directional Flow
  • Full Flow Design
  • NSF-51 Listed, FDA Approved

Return to Thermoplastic Ball Valves Product Selection Page

Part No.

Nom. Tube O.D.

 NPTF Thread Size

A

B

C

D

ØE Thru Hole Min.
PP4VMC2-MG(+) 1/4 1/8 2.22 1.21 1.4 .5 .19
PP4VMC4-MG 1/4 1/4 2.40 1.21 1.4 .5 .19
PP4VMC6-MG 1/4 3/8 2.40 1.21 1.4 .5 .19
PP4VMC8-MG(+) 1/4 1/2 2.59 1.21 1.4 .5 .19
PP6VMC2-MG(+) 3/8 1/8 2.33 1.32 1.4 .5 .25
PP6VMC4-MG 3/8 1/4 2.51 1.32 1.4 .5 .25
PP6VMC6-MG 3/8 3/8 2.51 1.32 1.4 .5 .25
PP6VMC8-MG(+) 3/8 1/2 2.70 1.32 1.4 .5 .25

Assembly Instructions:

  1. Inspect the mating threads for debris or damage. Remove any old fluoropolymer tape or sealant on previously used threads. br> If threads are damaged, use a new parker valve before proceeding.
  2. Apply 2 to 3 wraps of fluoropolymer tape or an NSF/FDA approved silicone sealant.
    Do not use Plumbers Putty or Pipe Dope. These chemically react with plastic materials and could cause a failure.
  3. Align ball valve onto mating thread to ensure cross threading does not occur.
  4. Screw ball valve onto mating thread 3 to 5 turns. Do not over-tighten
  5. Pressurize the system and check for leaks.