Teflex Woven | BFM® Fitting
Superior to traditional hose clamped canvas/cloth/rubber connectors
Teflex is a pure woven PTFE FDA-approved connector.
Use Teflex in applications requiring operation in extremely high temperatures and/or acidic or caustic environments. Teflex can continuously operate at 260°C / 500˚F with short term surges to 280°C / 536˚F. It also resists corrosion from products across the full pH scale; Either caustic or acidic products will not affect Teflex's performance.
Physical Properties
Fibre: Teflon PTFE
Colour: Natural (dark brown)
Construction/Finish: Basket weave
Weight: 678 g/m2 20 oz/yd2
Thickness (mm): 0.5 / 1/64”
Max. Operating Temp: 260˚C / 500˚F
Max. Surge Temp: 280˚C / 536˚F
Low Temp Flexibility: Good
Surface Resistance (Ohms): Insulative
Minimum Tensile Strength measured as a force over a 25mm wide Ravel Strip (Test Standard: ASTM D5035): Fabric Warp 90) Weft 100) kgf/25mm
Ultimate Elongation (%) (Test Standard: ASTM D5035): 55
Air Permeability: (cm3 /cm2 sec@125Pa) 0.3 (ft3/ft2 /min@0.5” wg) 0.5
Key Features/Uses
- Capable of running at high temperatures – continuously operating at 260°C / 500°F with short term surges at 280°C / 536°F
- Can be used on products across the full pH scale, i.e. either caustic or acid products will not effect Teflex
Available Sizes
Diameters: Ø100mm (4"), Ø125mm (5"), Ø150mm (6") through to Ø1,650mm (65") in 50mm (2") increments
Lengths: 80mm (3"), 100mm (4") then in 50mm (2") increments up to 1,500mm (4ft 11")
Complies With
FDA 21CFR 177.1550.