Parker 26 Series Tube-O Crimp Fittings

Use with the following Parker Hose Series:

201, 206, 213, 221FR, 225, 244, 266, 285, 293, and SS23CG.

Parker 26 series fittings (hose ends) are engineered to work with select Parker transportation and refrigerant (AC) hoses. These hoses’ inside diameters (ID) are sized smaller than a typical hydraulic hose. The dash sizes of these hoses refer to a nominal hose ID size and not the actual size. For example, -4 size would normally designate a 1/4” ID but in this case, the actual ID is 3/16”.

Because fittings are sized to fit the hose ID, the 26 series fitting sizes for the hose end of the fitting are not the actual measurements but nominal size – just like the hose they are designed to work with. For example, 10126-2-4 fitting is 1/8” on the pipe thread end and 3/16” (nominal -4 size) on the hose end.

Confusing? Just remember to match the dash size of the fitting to the dash size of the hose.  Refer to our technical pages for more information on correct hose assembly selection and fabrication.

Available 26 Series Tube-O Fittings

Male Tube-O - Swivel - Short Pilot with Charge Port for R12 1S526-PR

Male Tube-O - Swivel - 45° Elbow - Short Pilot 15R26

Female Tube-O - Swivel - 45° Elbow - Long Pilot With High Pressure Charge Port for R134a 15N26-PB

Male Tube-O - Swivel - 45° Elbow - Long Pilot With Low Pressure Charge Port for R134a 15P26-PT

Male Tube-O - Swivel - 90° Elbow - Short Pilot with High Pressure Charge Port for R134a 15K26-PB

Male Tube-O - Swivel - 90° Elbow - Long Pilot With Charge Port for R12 15M26-PR

Female Tube-O - Swivel - 90˚ Elbow - Short Pilot 15T26

Female Tube-O - Swivel - 90° Elbow - Long Pilot With High Pressure Charge Port for R134a 15L26-PB

Female Tube-O - Swivel - 90° Elbow - Long Pilot With Low Pressure Charge Port for R134a 15L26-PT