JIC 45 Elbows | Parker Triple-Lok

Parker Triple-Lok JIC tube fitting design is simple. The tube fitting consists of three pieces: the body, the nut and the sleeve. The tube end is flared at a mating 37 degree angle and sandwiched between the fitting nose (seat) and the sleeve. This creates a very effective seal between the fitting nose and tube flare, or hose. Read more about how JIC fittings work.

Although most JIC fittings are commonly viewed as 3,000 PSI connectors, Parker Triple-Lok JIC flared fittings are rated at 9,000 PSI for 1/4" size to 2000 PSI for 2” size. Parker JIC 37 degree flare fittings are manufactured in steel, 316 stainless steel or brass, and are readily available through Hose & Fittings, Etc.

Available JIC 45° elbow end configurations:

Parker Bulkhead Union WNTX

Bulkhead Union


Parker 37 Degree Swivel Elbow V6X

37° Swivel Elbow


Parker SAE-ORB 37 Degree Swivel Flare V5OX

SAE-ORB / 37° Swivel Flare


Parker ISO-6149 37 Degree Swivel Flare V87OMX

ISO-6149 / 37° Swivel Flare


Parker NPTF 37 Degree Swivel Flare VTX

NPTF / 37° Swivel Flare


Parker BSPP-ORR 37 Degree Swivel Flare V4OMX

BSPP-ORR / 37° Swivel Flare


Parker BSPT 37 Degree Flare  V3MX 

BSPT / 37° Flare




Warning Triangle WARNING: These products can expose you to chemicals including lead and/or lead compounds, which are known to the State of California to cause cancer or birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov