Water & Beverage Connectors | Parker
 |
 |
 |
 |
Back to Fittings Selection Page
Parker thermoplastic fittings and valves are specifically designed to handle water and beverage industry applications. They are suitable for conveying water, beverages, food, CO2, air, and dyes. For chemical compatibility, refer to the Product Specifications table on this page and the Fluid Compatibility Guide. (need a link here)
Product Specifications
|
Product Category |
Connection Technology |
Body | Seal |
Working Pressure At 73°F, 1 to 4 Burst Ratio* (PSI) |
Temperature (F) |
|||
| LIQUIfit (Inch) |
Gripping Ring Push Button Release |
Engineered High-Performance Nylon | EDPM | 230 | 230 | 190 | 160 | 35° to 200° |
| LIQUIfit (Metric) |
Gripping Ring Push Button Release |
Engineered High-Performance Nylon | EDPM |
(4 & 6MM) 230 |
(8MM) 230 |
(10MM) 190 |
(12MM) 160 |
35° to 200° |
| TrueSeal |
Collet Push Button Release |
Acetal Polypropylene Kynar |
EDPM EDPM Fluorocarbon |
300 150 300 |
300 N/A N/A |
300 150 300 |
250 150 N/A |
-20° to 180° 0° to 225° 0° to 275° |
| Fast & Tite |
Gripping Ring Compression |
Polypropylene Nylon |
Nitrile Nitrile |
300 300 |
300 300 |
250 250 |
200 200 |
0° to 212° -40° to 200° |
| Par-Barb | Barb |
Polypropylene Nylon |
None None |
125 125 |
125 125 |
125 125 |
125 125 |
-65° to 190° -40° to 200° |
| Quick Couplings | Quick Disconnect | Acetal | Nitrile | 120 | 120 | 120 | N/A | -40° to 180° |
|
TrueSeal Ball Valves |
Collet Push Button Release |
Polypropylene | EDPM | 150 | 150 | 150 | 150 | 0° to 225° |
|
LIQUIfit Ball Valves |
Gripping Ring Push Button Release |
Polypropylene | EDPM | 150 | 150 | 150 | 150 | 35° to 200° |
|
TrueSeal Check Valves |
Collet Push Button Release |
Acetal | EDPM | 150 | 150 | 150 | 150 | 34° to 150° |
|
Unleaded Brass |
Push Button Release |
Unleaded Brass | EDPM | * | * | * | * | 0° to 200° |
|
LIQUIfit Tubing |
- | Polyethylene | - | 120 | 145 | 125 | 90 | -80° to 150° |
Water & Beverage Connector Selection
 |
Push-to-Connect LIQUIfit Fittings An eco-designed alternative for water applications. No fluid contamination occurs and environmental protection is guaranteed. Use for water, beverages, food and CO2 applications in the water filtration, beverage dispensing, life science, bottling and semi-conductor markets. |
 |
Push-to-Connect TrueSeal Fittings Plastic, lightweight, and designed from FDA compliant materials. Available in acetal, polypropylene and kynar. Use for air, water, soft drinks, beer, wine, and dye applications in the food, potable water, chemical and filtration markets. |
 |
Compression Fast & Tite Fittings Install in seconds without the use of tools. Provide a leak proof seal without clamps or adjustments. Use for water, beverages, food and cooling fluids in the water filtration, beverage dispensing, life science, bottling and semi-conductor markets. |
 |
Injection molded from high strength, chemically inert thermoplastics. Use hose clamps. Use for water, beverages, food and cooling fluids in the water, beverage dispensing, bottling and semi-conductor markets. |
 |
Valved and non-valved options are available in various port configurations. Suitable for gas handling applications, FDA approved materials, 120 psi. |
 |
LIQUIfit, TrueSeal and Par-Barb style. Full flow, self-cleaning ball, FDA compliant. |
 |
Polyethylene Tubing Made from 100% virgin, high molecular weight resin material. FDA compliant for food contact. |
