D6 Series Hybrid Hose | Parker Parflex

    *Note: Beginning January 1, 2017, the D6 series hose will be discontinued by Parker. The D6R Series hose is recommended as a replacement. Please note that the D6R has a smaller O.D. and a smaller minimum bend radius. D6 series hose will still be available on special order, but will have longer lead times.

    Parker Parflex D6 Hybrid Hose is ideally suited for inventory consolidations to cover all SAE 100R1 pressure and many SAE 100R2 pressure requirements.

    Great for medium pressure (constant 3,000 psi working pressure) applications found on mobile hydraulic, wind power and ag equipment.

     Parker Parflex D6 Constant pressure hybrid 3000 PSI hose

    D6 Constant pressure hybrid 3000 PSI hose

    Specifications:   Exceeds SAE 100R17, MSHA accepted
    Application:  Industrial medium pressure hydraulic applications where a maximum 3000 PSI working pressure is required.
    Inner Tube:   Polyester
    Reinforcement:   1 or 2** braids of high tensile steel wire
    Cover:   Smooth synthetic rubber-MSHA approved
    Temperature Range:   -40°F to +250°F (-40°C to +121°C) Limited to +135°F (+57°C) when used with synthetic hydraulic fluids or water-based fluids
    Vacuum Rating:   28  inch Hg
    Crimp Fittings:  HY Series
    Field Attachable Fittings: Do not use

    Sizes and specifications

    Part No

    Inside Diameter

    Outside Diameter

    Working Pressure

    Min Bend Radius

    Weight

    Vacuum Rating

    Hose Ends

    B9

    in

    mm

    in

    mm

    psi

    MPa

    in

    mm

    lb/ft

    kg/m

    in of Hg

    kPa

    Crimp

    Filed Attach
    D604 1/4 6 .50 13 3000 20.7 2.0 51 .12 .18 28 94.8 HY -
    D606 3/8 10 .66 17 3000 20.7 2.5 64 .23 .34 28 94.8 HY -
    D608 1/2 13 .80 20 3000 20.7 3.5 89 .29 .43 28 94.8 HY -
    D610** 5/8 16 1.00 25 3000 20.7 4.0 102 .47 .70 28 94.8 HY -
    D612** 3/4 19 1.18 30 3000 20.7 4.8 122 .73 1.08 28 94.8 HY -
    D616** 1 25 1.48 38 3000 20.7 6.0 152 1.01 1.49 28 94.8 HY -

     

     

    Crimping instructions for hose assembly fabrication using Parker crimpers

     

    How to Order

     

    IMPORTANT!
    Hose and hose fittings series must be correctly matched. Using any fittings other than those specifically designated by the hose manufacturer for use with each specific hose can lead to hose assembly failure. Hose assembly failures have lead to damage, injury and death.

    WARNING: This product can expose you to chemicals including lead and/or DEHP and/or carbon black, which are known to the State of California to cause cancer or birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov

    AVAILABLE HOSE STYLES

    Select from the list below to navigate to a specific category...

    RELATED INFORMATION

    SAFETY: