HFS Series Parker Parflex Hose
*Note: Beginning January 1, 2017, the HFS series hose will be discontinued by Parker. The HFSR Series hose is recommended as a replacement. Please note that the HFSR has a smaller O.D. and a smaller minimum bend radius. HFS series hose will still be available on special order, but will have longer lead times.
 |
HFS - Firescreen Hybrid HoseSpecifications: SAE J517 ANSI A92.2 Meets or Exceeds SAE 100R7 |
IMPORTANT! When HY series crimp fittings are used with synthetic hydraulic fluids or water-based fluids, maximum operating temperature is limited to +135˚F (+57˚C).
Sizes and Specifications
|
Part No |
Inside Diameter |
Outside Diameter |
Working Pressure |
Min Bend Radius |
Weight |
Vacuum Rating |
Hose Ends |
|||||||
|
B9 |
in |
mm |
in |
mm |
psi |
MPa |
in |
mm |
lb/ft |
kg/m |
in of Hg |
kPa |
Crimp |
Filed Attach |
| HFS04 | 1/4 | 6 | .50 | 13 | 3000 | 20.7 | 2.0 | 51 | .12 | .18 | 28 | 94.8 | HY | BA |
| HFS05 | 5/16 | 8 | .58 | 15 | 3000 | 20.7 | 2.3 | 58.4 | .17 | .25 | 28 | 94.8 | HY | - |
| HFS06 | 3/8 | 10 | .66 | 17 | 2500 | 17.24 | 2.5 | 64 | .19 | .28 | 28 | 94.8 | HY | BA |
| HFS08 | 1/2 | 13 | .77 | 20 | 2500 | 17.24 | 3.5 | 89 | .25 | .37 | 28 | 94.8 | HY | BA |
| HFS12 | 3/4 | 19 | 1.05 | 27 | 1500 | 10.34 | 5.0 | 127 | .37 | .55 | 28 | 94.8 | HY | - |
| HFS16 | 1 | 25 | 1.35 | 34 | 1250 | 8.6 | 10.0 | 254 | .53 | .79 | 28 | 94.8 | HY | - |
Crimping instructions for hose assembly fabrication using Parker crimpers
IMPORTANT!
Hose and hose fittings series must be correctly matched. Using any fittings other than those specifically designated by the hose manufacturer for use with each specific hose can lead to hose assembly failure. Hose assembly failures have lead to damage, injury and death.
WARNING: This product can expose you to chemicals including lead and/or DEHP and/or carbon black, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov