Hydraulic Hybrid Hoses | Parker Parflex

hybrid-hose.jpg 

Parker Parflex Hybrid Hoses are generally constructed with a copolyester tube, one or two-wire reinforcement, and a synthetic rubber cover. These hoses offer superior flexibility and a versatile range of fluid compatibility in medium pressure hydraulic applications. The lightweight, compact design of Parker's hybrid hoses makes them easier to transport, route and work with than comparable rubber hoses.

 

 

Parker Parflex Hybrid Hose Selection

D6 - Hybrid Hose

d6-hose.png
  • Ideally suited for inventory consolidation to cover all SAE 100R1 and many SAE 100R2 pressure requirements
  • Exceeds SAE 100R17
  • MSHA accepted

 

D6R - Hybrid Hose

d6r-hybrid-hose.jpg
  • Up to 40% light than comparable rubber hoses
  • Bend radius less than half of conventional SAE 100R1 & 100R2 hoses
  • UV resistant cover
  • 3,000 psi working pressure
  • Long continuous package lengths available

HFS - Fire-Screen Hybrid Hose

hfs-firescreen-hybrid-hose.png
  • Excellent flexibility
  • Consistent long lengths
  • Lightweight
  • Compact design
  • Exceeds SAE 100R1
  • SAE J1942 listed for marine applications
  • MSHA accepted

HFSR - Fire-Screen Hybrid Hose

hfsr-hybrid-hose.jpg
  • Increased oil, ozone and impulse resistance
  • Up to 40% lighter than comparable rubber hoses
  • UV resistant cover
  • Patented process that bonds the core to the reinforcement to resist kinking and core wash out
  • Long package lengths typical, up to 500 foot
  • Meets/exceeds ISO pressure standards
  • Meets/exceeds SAE J517-100R1

HFS2 - Fire-Screen II Hybrid Hose

hfs2-firescreen-ii-hybrid-hose.png
  • Excellent flexibility
  • Consistent long lengths
  • Lightweight
  • Compact design
  • SAE J1942 listed for marine applications
  • Meets/exceeds SAE 100R2 & 100R16
  • MSHA accepted

HFS2R - Fire-Screen II Hybrid Hose

hfs2r-hybrid-hose.jpg
  • Excellent flexibility
  • Consistent long lengths
  • Lightweight
  • Compact design
  • Meets/exceeds SAE 100R16
  • MSHA accepted

HTB - Eliminator Hybrid Hose

htb-eliminator-hybrid-hose-parker.png
  • Four-spiral wire hose performance in a high tensile two-wire braid construction
  • Excellent flexibility
  • Consistent long lengths
  • SAE J1942 listed for marine applications
  • MSHA accepted

HTBR - Eliminator Hybrid Hose

htbr-hybrid-hose.jpg
  • 3500 to 7000 psi working pressure
  • UV & ozone resistant cover
  • Compact O.D.
  • MSHA accepted

M8 - E-Z FLEX Hybrid Hose

m8-e-z-flex-hybrid-hose-parker.png
  • Four-spiral wire hose performance in a high tensile two-wire braid construction
  • Excellent flexibility
  • Consistent long lengths
  • Meets/exceeds SAE 100R12
  • MSHA accepted

HJK - Highjack Jackline Hybrid Hose

hjk-highjack-jackline-hydrid-hose.png
  • 10,000 psi jack hose
  • Meets I J-100 requirements
  • MSHA accepted
  • For high pressure jackline applications

 

 

How to Order

 

California Prop 65 Warning WARNING: These products can expose you to chemicals including lead and/or DEHP and/or carbon black, which are known to the State of California to cause cancer or birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov

 

IMPORTANT!
Hose and hose fittings series must be correctly matched. Using any fittings other than those specifically designated by the hose manufacturer for use with each specific hose can lead to hose assembly failure. Hose assembly failures have lead to damage, injury and death.

WARNING: This product can expose you to chemicals including lead and/or DEHP and/or carbon black, which are known to the State of California to cause cancer or birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov