JK | Parker Hydraulic Jack Hose

Parker JK hose should be your choice for use on hydraulically powered jacking equipment. From its engineered inner tube, and twin braids of high-tensile steel reinforcement, to its durable outer cover, the JK hydraulic Jack Hose has been designed for high performance, easily supporting the rigors of high tonnage hydraulic jack applications.

• 10,000 psi to 10,500 psi max working pressure
• Engineered inner tube provides exceptional hydraulic fluid compatibility
• No-Skive design eliminates the need to remove hose cover before crimping
 Parker JK Hydraulic – Jack Hose hose

Parker JK Hydraulic Jack Hose

Application:  Petroleum base hydraulic fluids and lubricating oils
Inner Tube:   Nitrile
Reinforcement:   Two braids steel wire
Cover:   Synthetic rubber, Msah accepted
Temperature Range:   +120°F (-40°C to +49°C)
Fittings:  43 sereis

Parker JK Hydraulic Jack Hose | Sizes and Specifications

Part No

Inside Diameter

Outside Diameter

Working Pressure

Min Bend Radius

Weight

Vacuum Rating

Hose Ends

JK

in

mm

in

mm

psi

MPa

in

mm

lb/ft

kg/m

in of Hg

kPa

Crimp

Field Attachable

JK-4

1/4

6,3

0.59

15

10500

72,4

4

100

0.26

0,39

-

-

43

-

JK-6

3/8

10

0.75

22

10000

70

5

125

0.37

0,55

-

-

43

-

IMPORTANT!
Hose and hose fittings series must be correctly matched. Using any fittings other than those specifically designated by the hose manufacturer for use with each specific hose can lead to hose assembly failure. Hose assembly failures have lead to damage, injury and death.

NOTE: This product can only be assembled by certified distributors or customers according to the methods prescribed in Parker Bulletin 4480-T18-US. JK hose has a 2:1 design factor.

NOTE:  Only the following 43-series male NPTF rigid pipe fittings are approved for use with the JK hose:
10143-4-4
10143-4-6
10143-6-4 and
10143-6-6

 

Need More Information?

ASK QUESTION REQUEST QUOTE