Anhydrous Ammonia Hose | Parker 7262 Series

Anhydrous Ammonia Hose - Nylon Reinforced - Series 7262


Series 7262 is a lightweight anhydrous ammonia transfer hose. The hose construction incorporates corrosion resistant high tensile nylon braids for flexibility and kink resistance. The perforated cover is resistant to abrasion, mild chemicals and ozone, and the distinctive dual green stripes provide color-coded identification.

Parker Anhydrous Ammonia Hose Sizes & Specifications 

  • Tube: Black EPDM
  • Reinforcement: Multiple textile braids
  • Cover: Black EPDM; perforated wrapped finish
  • Temp. Range: -40°F to +180°F (-40°C to +82°C)
  • Brand Method: Side 1: Embossed
  • Side 2: Two solid green stripes
  • Brand Example: PARKER SERIES 7262 NYLON ANHYDROUS AMMONIA - (YEAR) - REMOVE NO LATER THAN (YEAR +6) - 350 PSI MAX WP ARPM (BATCH CODE) CAUTION ANHYDROUS AMMONIA USE ONLY -
  • (YEAR) -REMOVE NO LATER THAN (YEAR +6)
  • Design Factor: 5:1
  • Industry Standards: ARPM IP-14
  • Applications:   Anhydrous ammonia.  In-plant and tank transfer, transport and delivery; fertilizer dispensing.   Agriculture
  • Vacuum: Not recommended
  • Compare to: Goodall N2000
  • Packaging: Coils (bulk hose available only to Parker Certified Anhydrous Ammonia Hose Assembly Fabricators)

Part Number

ID

Reinf
Braids

OD

Approx Wt

Min Bend Rad

Max Rec WP

Perm
Cplg Rec

in

mm

in

mm

lbs/ft

kg/ft

in

mm

psi

bar

7262-502

1/2

12.7

2

0.950

24.1

0.25

0.11

5.0

127.0

350

24.1

7661

7262-752

3/4

19.1

2

1.250

31.8

0.38

0.17

8.0

203.2

350

24.1

HY

7262-1002

1

25.4

2

1.510

38.1

0.49

0.22

10.0

254.0

350

24.1

7661

7262-1252

1-1/4

31.8

2

1.781

45.2

0.61

0.28

12.0

304.8

350

24.1

HY

7262-1502K

1-1/2

38.1

2

2.030

51.6

0.73

0.33

14.0

355.6

350

24.1

43

7262-2003K

2

50.8

3

2.750

69.9

1.40

0.64

16.0

406.4

350

24.1

7661

WARNINGS!
„ Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines. „ For Anhydrous Ammonia use ONLY. Do not use in Liquid Petroleum Gas (LPG)/Propane or Natural Gas applications. Use only with couplings qualified by Parker. Do not use with couplings containing hidden o-rings such as male swivel couplings. For non-agricultural or refrigeration applications, contact Parker. „ Contact with Anhydrous Ammonia (NH3) will burn skin and is especially damaging to the eyes and lungs. This is true for its liquid and gaseous (vapor) state. Many accidents involving NH3 have occurred by using the wrong hose. NH3 hose must be specially compounded and constructed to handle the media. NEVER use a hose that is not designed for NH3 because it may fail very quickly and cause bodily injury or death. It is especially important to ensure that only Anhydrous Ammonia hose is recommended and used for this service. Refer to ARPM Publications IP-14 “Anhydrous Ammonia Hose, Specifications” and IP-11-2 “Anhydrous Ammonia Hose, Manual for Maintenance, Testing and Inspection.”

 

 

How to Order

  • Visit One of Our ParkerStores
  • Click on the quote button below.
 ASK QUESTION!  REQUEST QUOTE

 

 

IMPORTANT!
Hose and hose fittings series must be correctly matched. Using any fittings other than those specifically designated by the hose manufacturer for use with each specific hose can lead to hose assembly failure. Hose assembly failures have lead to damage, injury and death.

California Prop 65 Warning WARNING: These products can expose you to chemicals including lead and/or DEHP and/or carbon black, which are known to the State of California to cause cancer or birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov