Polyethylene Tubing | Parker Series EA
Note: As of September 1, 2018, production of Series EA polyethylene tubing will be discontinued. E-Series polyethylene tubing is recommended as a replacement.
This tubing is specially formulated with Sanitized® to resist degradation from mildew, algae, fungi and biofilm that can accumulate on the inside or outside of tubing in filling and processing applications. For use in water systems and food, beverage & other applications where microbial growth can cause problems.
Use with Parker antimicrobial filters to create a complete system.
Sizes and Specifications
|Part Number||Tube O.D. (in)||Tube I.D. (in)||Average Wall Thickness (in)||Working Pressure (psi, at 73°F/23°C)||Minimum Burst (psi, at 73°F/23°C)||
Minimum Bend Radius (in)
- Packaged 100 foot coils - sealed clear polyethylene bag. Special lengths available.
- A tube support should be used with this tubing for maximum holding power where end loading, vibration or pressure spikes may occur. See compatibility chart for plastic tubing with fittings.
Use with The Following Parker Fittings
- Fast & Tite
- Flow Control
- Prestolok Brass
- Prestolok Composite
- SAE Cartridge