High-Strain Sensors | Parker SensoNODE™ Blue

Parker High-Strain sensors are soft, thin devices made from tough silicone rubber that can be used to measure strain, displacement or vibration in machines, vehicles and facilities. These sensors take accurate measurements and readings while being strained up to 100% for milions of cycles. They can withstand heat, cold, vibration, moisture and shock in the harshest environments.



  • Ultra-high strain (up to 100%)
  • High accuracy, high precision
  • Conformable
  • Rapid response
  • Soft, thin, flexible, unobtrusive
  • Pre-calibrated output
  • Temperature compensated output
Back to SensoNODE Main Page

 Technical Data

Active Area Dimensions

SNES-50R14-C3-02: 50mm x 14mm

SNES-100R14-C3-02: 100mm x 14mm

Maximum Extension

100% stretch of the active area

(e.g. 50 mm for SNES-50RT14)

Accuracy ±0.25% strain (±125μm)

0.026% strain

(e.g. 13μm for SNES-50RT14)

±1% Full Scale
Hysteresis ±1% Full Scale
Stretching Force Profile
<1N @ 10% Strain; <9N @ 100% Strain
Cyclic Life
> 1 Million Cycles
Measurement Outputs
Percent strain in 100th of a percent of the length of the active area, Temperature in degrees Kelvin
Sampling Rate 1 - 10hz for standard configuration (designed for reporting via wireless), 1 - 100hz+ by request
Wired Electrical Interface
Serial (UART & SPI); 3.3V DC
Operating Environment
-40°C to 85°C, 0 to 100% RH, IP67 rated for industrial applications
Wireless Radio
2.4Ghz for SensoNODE Blue Radio Transmitter

SensoNode Part Numbers



Part Number Active Area (mm)
Extension (mm)
SNES-50R14-C3-02 50 x 14 50
SNES-100R14-C3-02 100 x 14 100



Ask Question



Request a Quote


Warning Triangle WARNING: These products can expose you to chemicals including lead and/or DEHP and/or carbon black, which are known to the State of California to cause cancer or birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov