Parker I-TL | 24° Flareless Non-Return Valves for Metric Tubing | Parker EO
 |
Bite-Type Non-Return Valve Internal Parts Part #: I-TL Manufacturer: Parker |
Standard: Material steel zinc plated (CF), springs pophated and oiled. Packing disc of NBR (e.g., buna N), opening pressure 1 bar.
On request: Packing disc of FKM (e.g. fluorocarbon) Stainless steel 1.4571, packing disc of NBR (e.g., buna N) or FKM (e.g., fluorocarbon) (on request).
Temperature rating, without pressure reductions of non-return valves with NBR seals (e.g), buna N-standard)
is -35°C tp +100°C and with FKM seals (e.g., fluorocarbon) (on request) is -25°C to120°C.
|
TUBE |
For Use |
d1 |
d2 |
d3 |
L1 |
L2 |
L3 |
STANDARD |
||
|
S |
SS |
B |
||||||||
|
ITL06L/06 + 08S |
6L, 6S, 8S |
3.5 |
7.5 |
8.6 |
8.2 |
2.0 |
1.0 |
· |
|
|
|
ITL08L/10S |
8L, 10S |
5.5 |
10.2 |
11.6 |
11.0 |
2.0 |
1.7 |
· |
|
|
|
ITL10L/12S |
10L, 12S |
7.5 |
13.0 |
14.1 |
14.0 |
2.0 |
2.3 |
· |
|
|
|
ITL12L/14S |
12L, 14S |
9.5 |
16.7 |
18.1 |
16.5 |
2.5 |
2.9 |
· |
|
|
|
ITL15L/16S |
15L, 16S |
11.5 |
19.5 |
20.6 |
19.0 |
2.5 |
3.5 |
· |
|
|
|
ITL18L/20S |
18L, 20S |
15 |
25.2 |
27.1 |
22.5 |
3.0 |
4.4 |
|
|
|
|
ITL22L/25S |
22L, 25S |
19 |
30.8 |
32.6 |
27.0 |
3.0 |
5.5 |
· |
|
|
|
ITL28L/30S |
28L, 30S |
24 |
38.6 |
40.6 |
32.5 |
3.5 |
7.3 |
|
|
|
|
ITL35L + 42L/38S |
35L, 42L, 38S |
29 |
45.7 |
48.1 |
37.5 |
3.5 |
8.9 |
|
|
|
Note: Omit "CF" in the part number for steel material.
Tube Fittings
- Select another EO Fitting
- Select EO-2 Fitting (Bite type fitting for metric tubing with elastomeric seal)
- Select Ferulok Fitting (Bite type fittings for inch tubing)
- Select Intru-Lok Fitting (Bite type fittings for brass, copper, aluminum and plastic inch tubing)
- Select Another Tube Fitting Type
- Go To Product Selection Page
Orders & Quotes
 |
 |
 |
24° Flareless | Parker EO
The EO fittings are the most widely used bite type fittings in the world.
The EO progressive ring fitting is a flareless fitting for metric tubing that consists of a body, a progressive ring (ferrule) and a nut. On assembly, two cutting edges of the progressive ring “bite” into the outer surface of the tube ensuring the necessary holding power and seal for high operating pressures.
The EO Body. EO fitting bodies are available in over thirty configurations. The shaped products (i.e., elbows, tees, crosses) are hot forged, then machined to the stringent EO fitting specifications. The forging process used by Parker further improves the strength and metallurgical properties of the fitting material.