JK | Parker Hydraulic Jack Hose
Parker JK hose should be your choice for use on hydraulically powered jacking equipment. From its engineered inner tube, and twin braids of high-tensile steel reinforcement, to its durable outer cover, the JK hydraulic Jack Hose has been designed for high performance, easily supporting the rigors of high tonnage hydraulic jack applications.• 10,000 psi to 10,500 psi max working pressure
• Engineered inner tube provides exceptional hydraulic fluid compatibility
• No-Skive design eliminates the need to remove hose cover before crimping
 |
Parker JK Hydraulic Jack HoseApplication: Petroleum base hydraulic fluids and lubricating oils |
Parker JK Hydraulic Jack Hose | Sizes and Specifications
|
Part No |
Inside Diameter |
Outside Diameter |
Working Pressure |
Min Bend Radius |
Weight |
Vacuum Rating |
Hose Ends |
|||||||
|
JK |
in |
mm |
in |
mm |
psi |
MPa |
in |
mm |
lb/ft |
kg/m |
in of Hg |
kPa |
Crimp |
Field Attachable |
|
JK-4 |
1/4 |
6,3 |
0.59 |
15 |
10500 |
72,4 |
4 |
100 |
0.26 |
0,39 |
- |
- |
43 |
- |
|
JK-6 |
3/8 |
10 |
0.75 |
22 |
10000 |
70 |
5 |
125 |
0.37 |
0,55 |
- |
- |
43 |
- |
IMPORTANT!
Hose and hose fittings series must be correctly matched. Using any fittings other than those specifically designated by the hose manufacturer for use with each specific hose can lead to hose assembly failure. Hose assembly failures have lead to damage, injury and death.
NOTE: This product can only be assembled by certified distributors or customers according to the methods prescribed in Parker Bulletin 4480-T18-US. JK hose has a 2:1 design factor.
NOTE: Only the following 43-series male NPTF rigid pipe fittings are approved for use with the JK hose:
10143-4-4
10143-4-6
10143-6-4 and
10143-6-6
