Spigots | BFM® Fitting

    BFM Fitting Spigot
    For Food, Chemical, Pharmaceutical & Mineral Processing Plants
    Superior to traditional hose clamped canvas/cloth/rubber connectors 

     

    Available in Stainless Steel T304L and T316L , as well as C22 Hastelloy. They are available in a range of exact sizes, eliminating the imprecise nature of hose-clamp sleeve type connection widths and ensuring a perfect fit with the BFM® connector.

    Quotes & Questions

    Physical Properties

    Material: Stainless Steel T316L, Stainless Steel T304L, C22 Hastalloy

    Interior Finish: ≤ 0.8Ra micro-meters (32Ra micro-inches)

    Wall Thickness: 2.0mm, 5/64"

    Length (for all diameters): 89mm, 3 1/2", (Head: 37mm,1 1/2"), (Tail: 52mm, 2 3/64")

    Available Diameters (Stainless Steel): 100mm*, 125mm, 150mm then in 50mm increments up to 1,650mm 4"*, 5", 6" then in 2" increments up to 65" (*Ø measured on outside (OD), all other sizes measured on inside (ID))

    Available Diameters (Hastalloy): From 150mm up to 500mm in 50mm increments, From 6" up to 20" in 2" increments

    Key Features/Uses

    • The design is slightly tapered, so the OD at the top of the tail is 5mm / 13/64”  greater than the base
    • 89mm (3 1/2") in total length - made up of a head of 37mm (1 29/64") and a 'tail' that is 52mm (2”) long 
    • The tail can be easily cut down or cut on an angle to suit your existing pipework
    • To enable the installation of a TR (Tool Release) connector, a 6mm / 15/64” hole must be drilled in the top ridge of the head

    Available Sizes

    Diameters: Ø100mm (4"), Ø125mm (5"), Ø150mm (6") to Ø1,650mm (65") in 50mm (2") increments

    Resources

    Quotes & Questions