Parker’s 5CNG Compressed Natural Gas Hose will be on display at ACTEXPO 2015 in Dallas, Texas, May 5-8, in Parker booth number 537.

5CNG hose assemblies are produced by Parker's Parflex Division for use in gas dispensing systems, private and commercial refueling stations, on-vehicle fuel lines and residential CNG refueling. These assemblies are available only as Parker factory assemblies through Parker’s network of ParkerStores.The 5CNG hose assemblies are offered in a CSA certified single-line assembly and as a packaged twin-line solution with hoses bonded into a compact, safe, easy-to-install assembly. These hose assemblies can be up to 30% lighter than rigid tubing and can reduce part number complexity and installation time by providing assemblies that eliminate tangled hoses.

5CNG Hose Specifications

Part Number Nominal ID Maximum OD Max. Working Pressure Min. Bend Radius Vacuum Rating Weight
Inch mm inch mm psi Mpa inch mm inch lbs/ft kg/m
5CNG-3 3/16 5 0.43 11 5,000 34.5 1.5 38 28 0.05 0.07
5CNG-4 1/4 6 0.62 16 5,000 34.5 2.0 51 28 0.11 0.16
5CNG-6 3/8 10 0.65 16 5,000 34.5 3.0 76 28 0.09 0.13
5CNG-8 1/2 13 0.90 23 5,000 34.5 4.0 102 28 0.21 0.31
5CNG-12 3/4 19 1.15 29 5,000 34.5 7.5 191 28 0.24 0.36
5CNG-16 1 25 1.59 40 5,000 34.5 10.0 254 28 0.36 0.53

5CNG Hose Construction:

Tube: Electrically conductive nylon
Reinforcement: Fiber
Cover: Polyurethane

5CNG Hose Operating Parameters:

Size: 1/4" (6 mm) to 1" (25 mm) I.D.
Operating Temperature: from -40ºF (-40ºC) to +180ºF (+80ºC)
Maximum Working Pressures 5,000 psi (345 bar) for all sizes.

5CNG Hose Certifications:

All hose assemblies are pressure tested and electrically tested for conductivity prior to shipping, and comply with NFPA 52, ANSI/IAS NGV 4.2 and CSA 12.52.

5CNG Hose End Availability:

5CNG hose assemblies can be fabricated with Parker 55 Series, 58 Series or 58H Series crimped fittings. For available sizes and configurations of each fitting series, please refer to tables below.



Related Articles
Measures to Keep Production of 5CNC Hose Uninterrupted

Measures to Keep Production of 5CNC Hose...

Last week, Parker Parflex Division announced new measures to ensure the availability of the 5CNG...
Read More
New Hose Cut-Off Saws from Parker Hannifin

New Hose Cut-Off Saws from Parker Hannifin

This week, Parker’s Hose Products Division announced new cut-off saws replacing the old workhorse...
Read More
Genuine Parker Parts Program | 3-Year Leak Free Warranty

Genuine Parker Parts Program | 3-Year Leak Free...

Parker's Three-Year Genuine Parts Warranty - a program for hydraulic component manufacturers. Under...
Read More
Parker’s Parflex Division Announces Material Changes Involving Three Products

Parker’s Parflex Division Announces Material...

New Thermoplastic Elastomer Cover for 53DM/538DM DuraMax™ Hose – Now Rated to -70F Blue Nylon Tough...
Read More